Hysecurity 14F Hydraulic Industrial Barrier Gate
Operators in each of these categories presents a complete and cutting-edge range reliable best in their class able to satisfy the requirements of any demanding customer, both residential and industrial/commercial from our years of experience.
We are distributors for the products we sell and offer factory support, site preparation, electrical rough-in and traffic flow help for your engineer, architect or maintenance personnel with our licensed contractor.
Hysecurity 14F Hydraulic Industrial Barrier Gate
Fast, up to 14 ft (4.3 m)
Open up to 14 ft (4.3 m) arms, to a full 90°, in just 2 seconds. Arm will remain vertical when held open. Side mount with lighted oval aluminum arm, HyProtect™ breakaway arm bracket and kill switch, which stops arm motion after vehicle hit. Few moving parts, all enclosed in secure, strong uni-body 10 gauge welded and zinc plated steel chassis. Powder coat safety yellow for high visibility and an enduring, attractive finish. Arm available in 10, 12 or 14 ft lengths.
Cutsheets, Installation Manuals and Accessory Manuals
Operator Specifications:
| Duty Cycle | 2,000 cycles/day |
| Arm Speed | 2 seconds to open; 3 seconds to close |
| Arm Length | Up to 14 ft (4.3 m) |
| Arm Designs | Side mount. Aluminum oval arm with bumper, lights, HyProtect™ breakaway arm bracket & kill switch |
| Operator HP | 3/4 hp |
| Drive Type | Hydraulic |
| UPS Battery Backup Cycles | StrongArm 14F UPS or optional 230V AC Power Supply w/HyInverter AC™ ** |
| Single Phase Voltages | 115/208/230V 60Hz; 110/220 50Hz* |
| Three Phase Voltages | 208/230/460V or 575V* 60Hz; 220/380V 50Hz* |
| Temperature Rating | -40° to 158° F (-40° to 70° C) No heater necessary |
| Communication | RS-232, RS-485; Ethernet/fiber using optional HyNet™ Gateway accessory |
| User Controls | Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and 32 character, OLED display or a PC using S.T.A.R.T. software. |
| Relays | Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs |
| App Class | Usage Class I, II, III, IV |
| Enclosure | n/a |
| Finish Type | Zinc plated with yellow powder coating |
| Warranty | 5 year |
| * | *Refer to Installed Options on pricing for all 50Hz voltages and 575V 3Ø which are special order. |
| ** | **The operator’s normal duty cycle and the actual number of arm cycles available from battery depends upon arm length/weight, battery size, state of charge and health, ambient temperature, accessory power draw and frequency of arm cycles during power outage. |
Model: StrongArm 14F
Est. Ship Weight: 335 lb
Shipping Class: 70