Hysecurity 20 Hydraulic Industrial Barrier Gate
Operators in each of these categories presents a complete and cutting-edge range reliable best in their class able to satisfy the requirements of any demanding customer, both residential and industrial/commercial from our years of experience.
We are distributors for the products we sell and offer factory support, site preparation, electrical rough-in and traffic flow help for your engineer, architect or maintenance personnel with our licensed contractor.
Hysecurity 20 Hydraulic Industrial Barrier Gate
Up to 20 ft (6 m)
Open a 20 ft (6 m) arm, to a full 90°, in 3 seconds. Arm will remain vertical when held open. Side mount arms up to 18 ft (5.5 m). Center yoke mount for arms up to 20 ft (6 m). Aluminum or fiberglass arm options. Keyed T-lock protects all electrical controls and parts in secure, strong uni-body 10 gauge welded and zinc plated steel chassis.
Note: Barrier arm and arm mounting bracket prices are not included in StrongArm base prices. See “StrongArm Options” for arm configurations and arm assembly prices. Wood arms up to 14 ft (4.3 m) maximum. Arms 20 ft or longer require counterweights.
Cutsheets, Installation Manuals and Accessory Manuals
Operator Specifications:
| Duty Cycle | 2,000 cycles/day |
| Arm Speed | 3 seconds to open; 4 seconds to close |
| Arm Length | Up to 20 ft (6 m)* Side mount available for arms up to 18 ft (5.5 m) |
| Arm Designs | Side mount – aluminum up to 18 ft (5.5 m), fiberglass up to 16 ft (5 m) or wood up to 14 ft (4.3 m). Center yoke mount – aluminum up to 20 ft (6 m) |
| Operator HP | 3/4 hp |
| Drive Type | Hydraulic |
| UPS Battery Backup Cycles | StrongArm 20 UPS or optional 230V AC Power Supply w/HyInverter AC™ |
| Single Phase Voltages | 115/208/230V 60Hz; 110/220V 50Hz** |
| Three Phase Voltages | 208/230/460V or 575V** 60Hz; 220/380V 50Hz** |
| Temperature Rating | -40° to 158° F (-40° to 70° C) No heater necessary |
| Communication | RS-232, RS-485, Ethernet/fiber using optional HyNet™ accessory |
| User Controls | Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and 32 character, OLED display or a PC using S.T.A.R.T. software. |
| Relays | Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs |
| App Class | Usage Class I, II, III, IV |
| Enclosure | n/a |
| Finish Type | Zinc plated with yellow powder coating |
| Warranty | 5 year |
| * | *Refer to Installed Options on pricing for all 50Hz voltages and 575V 3Ø which are special order. |
| ** | **The operator’s normal duty cycle and the actual number of arm cycles available from battery depends upon arm length/weight, battery size, state of charge and health, ambient temperature, accessory power draw and frequency of arm cycles during power outage. |
Model: StrongArm 20
Est. Ship Weight: 335 lb
Shipping Class: 70